SCHEDULE OF EVENTS
Registration: 7:30 AM to 8:30 AM
Exhibit Areas: 8:00 AM to 2:00 PM
Time Out for Training: 8:00 AM To 12:00 PM
Plow Rally: 8:30 AM SHARP for Safety Meeting
Backhoe Competition: 9:00 AM SHARP for Safety Meeting
Lunch & Raffle Drawing: 10:30 AM - 1:00 PM, raffle to follow
Time Out for Training Drawings And Awards: 12:30 PM location TBD
This round table workshop will include:
Instructor: Evelyn Boardman – Vermont Department of Environmental Conservation Municipal Roads Program Coordinator, 8 years of watershed assessment and restoration experience in Vermont with state government and as a consultant.
Roads Scholar Category - 5 Technical hours
This class is for Supervisors and those involved in construction and maintenance.
This is an interactive class designed to improve public works maintenance practices and procedures and is designed to point out and emphasize the importance of inspection on the outcome of maintenance and construction projects. The class covers and points out what to look for in many of the usual maintenance practices done in Vermont, including asphalt paving, crack sealing seal coats, and more.
Instructor: Paul Brown is the owner and president of Roadtech Inc., a training and consulting company focused on highway-related issues. Paul has over 40 years in the road and winter maintenance operations, pavement preservation, and pavement management industry. Paul comes most recently from Massachusetts DOT; as the Director of Snow and Ice Operations/ Roadside Engineer. He has extensive knowledge of Public Works Operations and Road Maintenance Techniques and has shared his knowledge across the country by working with Municipal and State agencies as a consultant. He has served on many national committees and peer exchanges to assist the industry in improving methods and techniques.
Roads Scholar Category - 6 Technical hours
This class is for Supervisors and those involved in construction and maintenance.
This is an interactive class designed to improve public works maintenance practices and procedures and is designed to point out and emphasize the importance of inspection on the outcome of maintenance and construction projects. The class covers and points out what to look for in many of the usual maintenance practices done in Vermont, including asphalt paving, crack sealing seal coats, and more.
Instructor: Paul Brown is the owner and president of Roadtech Inc., a training and consulting company focused on highway-related issues. Paul has over 40 years in the road and winter maintenance operations, pavement preservation, and pavement management industry. Paul comes most recently from Massachusetts DOT; as the Director of Snow and Ice Operations/ Roadside Engineer. He has extensive knowledge of Public Works Operations and Road Maintenance Techniques and has shared his knowledge across the country by working with Municipal and State agencies as a consultant. He has served on many national committees and peer exchanges to assist the industry in improving methods and techniques.
Roads Scholar Category - 6 Technical hours
This round table workshop will include:
Instructor: Evelyn Boardman – Vermont Department of Environmental Conservation Municipal Roads Program Coordinator, 8 years of watershed assessment and restoration experience in Vermont with state government and as a consultant.
Roads Scholar Category - 5 Technical hours
This round table workshop will include:
Instructor: Evelyn Boardman – Vermont Department of Environmental Conservation Municipal Roads Program Coordinator, 8 years of watershed assessment and restoration experience in Vermont with state government and as a consultant.
Roads Scholar Category - 5 Technical hours
This is a 3-day course and is a hybridized workshop that is a fast-paced introduction to a variety of welding processes commonly used in state and municipal garages today. This course will provide a demonstration of the equipment and fundamentals of each process in combination with a description and discussion of the process limitations and typical applications. Students will gain an understanding and appreciation of these processes through hands-on application of the techniques used in the following: thermal cutting (OFC and plasma); shielded metal arc welding (60ll and 7018) and gas metal arc welding (ER70S). The structure and duration of this experience is a basic introduction and therefore is not designed to build proficiency in any single welding process, but individuals will move along at their level of proficiency. *Students will be expected to wear leather shoes or boots, safety glasses, and a long-sleeved shirt.
* This workshop is a prerequisite to the Intermediate Welding Processes workshop that we will be having this summer.
Roads Scholar Category - 16 Equipment hours
Maximum 8 Participants
This is a 3-day course and is a hybridized workshop that is a fast-paced introduction to a variety of welding processes commonly used in state and municipal garages today. This course will provide a demonstration of the equipment and fundamentals of each process in combination with a description and discussion of the process limitations and typical applications. Students will gain an understanding and appreciation of these processes through hands-on application of the techniques used in the following: thermal cutting (OFC and plasma); shielded metal arc welding (60ll and 7018) and gas metal arc welding (ER70S). The structure and duration of this experience is a basic introduction and therefore is not designed to build proficiency in any single welding process, but individuals will move along at their level of proficiency. *Students will be expected to wear leather shoes or boots, safety glasses, and a long-sleeved shirt.
* This workshop is a prerequisite to the Intermediate Welding Processes workshop that we will be having this summer.
Roads Scholar Category - 16 Equipment hours
Maximum 8 Participants
This is a 3-day course and is a hybridized workshop that is a fast-paced introduction to a variety of welding processes commonly used in state and municipal garages today. This course will provide a demonstration of the equipment and fundamentals of each process in combination with a description and discussion of the process limitations and typical applications. Students will gain an understanding and appreciation of these processes through hands-on application of the techniques used in the following: thermal cutting (OFC and plasma); shielded metal arc welding (60ll and 7018) and gas metal arc welding (ER70S). The structure and duration of this experience is a basic introduction and therefore is not designed to build proficiency in any single welding process, but individuals will move along at their level of proficiency. *Students will be expected to wear leather shoes or boots, safety glasses, and a long-sleeved shirt.
* This workshop is a prerequisite to the Intermediate Welding Processes workshop that we will be having this summer.
Roads Scholar Category - 16 Equipment hours
Maximum 8 Participants
